14/16 slots Unmanaged Media Converter Chassis
PRODUCT OVERVIEW
We have two types of rack-mounted chassis for unmanaged media
converters : 2-U 14 slots media converter chassis and 2-U 16 slots
media converter chassis .The 14 slots media converter chassis
supports plug-and–play installation of stand-alone media converters
convert modules ,can hold at most 14 pieces media converters. The
16 slots media converter chassis media converter chassis should be
used with card-type media converters .The 16 slots media converter
chassis can hold at most 16 card-type converters of 10/100M .
14 slots rack-mounted chassis 16 slots rack-mounted chassis
This converter chassis can supply several media converters with
power ,this will simple the links and structure , it can work
stably and adapt broad width of voltage .It can store strong power
and can be operated and managed easily. The maintenance of this
chassis is also very easy. This option is the very one to meet the
requirements of good stability , high capacity , good integration
and good quality .
This option supports hot-swap convert modules .It can work with
single power supply or dual power supply as users wish, when the
power supply should be maintained or
changed ,it is not necessary to pull-out the converters ,this makes
the maintenance easy. With all these advantages ,this option can
supply users with an effictive solution of networks.
INSTALLATION
1. When you unpack this product package ,please check the devices
with packing list .
2. Install the converter chassis in a standard 19” cabinet and fix
it .
3. For 14 slots media converter chassis: Unscrew two screws from
the side next to the
RJ45 port of the media converter .Then use these two screws to fix
the carrier given with this option onto the side of media converter
,leaving the bigger side of the screws ahead. Then insert the
converter to the chassis ,make sure the power plug of chassis is
inserted in the power port of media converter . When the converter
is fully and firmly fit the chassis ,fasten the screws on the
carrier .Follow t he above steps ,install all
necessary converters in the chassis, then block up any slots not
for use
temporarily .Then go to step 5 .
4. For 16 slots media converter chassis: Insert the card-type
converter to the guide rails of the slot ,leaving the bigger side
of the screws ahead .Make sure the power plug of card-type
converter is inserted in power port of chassis. When the card-type
converter is fully and firmly fit the chassis ,fasten the screws
.Follow the above steps ,install all necessary card-type converters
in the chassis, then block up any slots not for use temporarily
.Then go to step 5 .
5. Insert the RJ45 twisted pair to the electrical port of converter
,and insert the fiber to the fiber port of the converter .Then
connect the supplied AC to DC power adapter to the receptacle at
the back of the chassis ,attach the plug into a standard AC outlet
with a voltage range from 100 to 260 Vac or a DC outlet with a
voltage of 48 Vac. Then turn the power switch on ,the POWER LED
Lamps in the chassis will on and at green color.( For 14 slots
media converter chassis, the POWER LED Lamp is in front side. For
16 or 17 slots media converter chassis, the POWER LED Lamps are in
both front side and back side.)Then the fans began to work ,that
shows the power supply of the chassis is normal and stable. The LED
Indicator Lamps of converters installed in chassis should indicate
valid network connections and working status. Then the chassis
began to work stably.
6. If the chassis is with dual power supply ,please turn on both
two power supply ,and they will work together. This will extends
the life cycle of the power supply, and can make sure the chassis
work normally in case one of them broken down.
