SGX25xxP Series Gigabit L2 Managed POE Switch with SFP+
Products Description
SGX25xxP Series is a two-layer managed 10-Gigabit switch, providing
24/48 10/100/1000Mbps ports and 4/6
1000/10000Mbps SFP+ optical fiber interfaces, which can be used to
connect upstream devices with higher bandwidth.
Featured with 24 IEEE 802.3at/af-compliant RJ45 ports, it supplies
a maximum PoE power output of 370W/450 W. The
switch can supply power when transmitting data with APs, IP
cameras, and IP phones through CAT5 cables.Using
store-and-forward technology, combined with dynamic memory
allocation, ensure that bandwidth is effectively allocated
to each port. With flow control, it can effectively avoid data
packet loss. The backup and redundancy capabilities of the
line can be realized through load balancing technology. The product
has rich business features and is widely used in
the access of enterprise networks and campus networks to build
high-performance, easy-to-manage, easy-scalable,
and low-cost Gigabit-to-desktop solutions for users. Built-in
high-reliability and wide-voltage input design power supply,
even if the grid voltage is unstable, it can ensure that the
equipment can work normally.
Main Features
Provide -48V DC power for powered devices (PDs), such as IP Phones,
WLAN APs, and Bluetooth APs.
Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W), can
supply power to PDs under these two
standards.
Automatically detect and supply power to IEEE802.3at and IEEE
802.3af compliant powered devices(PDs).
Only supply power to IEEE 802.3af/at compliant PDs, no worry about
damaging other private standard PoE
devices or devices without PoE function.
Support port power supply prioritization, guarantee the continuous
power supply of key nodes.
Up to 100m network cable transmitting distance, support flexible
network expansion without power line
deployment concerns. Users can freely fix their wireless APs, IP
cameras or other end devices on the wall or
ceiling.
Support short-circuit protection function, the switch will
automatically start short-circuit function and cut off the
power supply when there is high-current or other power failures,
which can efficiently defend against device
damage or network failures caused by line fault or wrong
installation.
POE intelligent strategy: POE intelligent diagnosis, POE timing
restart, Power supply schedule.
Support CLI Management ,SNMP Management, simple WEB management,
easy to configure the functions of
switches.
